Pultruded Material
PULTRUDED GLASS FIBRE ROD
|
3.0 mm dia x 1 metre |
£0.60 per metre plus post |
Ideal for reinforcing leading edges of wings, etc. Also use to make small brushes! Burn the end to melt the epoxy out, the remaining glass makes a very good disposable brush for epoxy.
PULTRUDED SECTIONS by MAARTEN VANDIJK
Maarten is developing the production of special pultruded sections of carbon fibre, sizes available:-
Trailing Edge
|
Trailing edge section |
1.6 mm x 0.6 mm to 0.4 mm x 1000 mm |
£3.50 per piece plus post |
|
Trailing edge section |
3.0mm x 0.7 mm to 0.5 mm x 1000 mm |
£4.00 per piece plus post |
|
Trailing edge section |
3.8 mm x 0.85 mm to 0.6 mm x 1000 mm |
£4.50 per piece plus post |
The trailing edge is a trapezoidal section.
Spars - Flat Strip
|
Spars |
7.00 mm x 0.30 mm x 1000 mm |
£3.00 per piece plus post |
|
Spars |
1.00 mm x 0.40 mm x 1000 mm |
£2.00 per piece plus post |
|
Spars |
2.00 mm x 0.40 mm x 1000 mm |
£2.20 per piece plus post |
|
Spars |
3.00 mm x 0.40 mm x 1000 mm |
£2.30 per piece plus post |
|
Spars |
3.00 mm x 0.60 mm x 1000 mm |
£2.40 per piece plus post |
|
Spars |
4.00 mm x 0.60 mm x 1000 mm |
£2.50 per piece plus post |
|
Spars |
2.00 mm x 0.80 mm x 1000 mm |
£2.50 per piece plus post |
|
Spars |
3.00 mm x 0.80 mm x 1000 mm |
£3.00 per piece plus post |
|
Spars |
6.00 mm x 0.80 mm x 1000 mm |
£4.00 per piece plus post |
|
Spars |
8.00 mm x 0.80 mm x 1000 mm |
£4.00 per piece plus post |
|
Spars |
4.00 mm x 1.10 mm x 1000 mm |
£4.00 per piece plus post |
Cap Strips
|
Capstrips |
3.00 mm x 0.13 mm 10 x 1 metre lengths |
£16.00 per pack plus post |
|
Capstrips |
2.00 mm x 0.13 mm 10 x 1 metre lengths |
£16.00 per pack plus post |
|
Capstrips |
1.50 mm x 0.12 mm 10 x 1 metre lengths |
£16.00 per pack plus post |
|
Capstrips |
1.00 mm x 0.12 mm 10 x 1 metre lengths |
£16.00 per pack plus post |
Half Round
|
Half round |
0.7 mm half round x 1 metre |
£2.00 per metre plus post |
|
Half round |
1.0 mm half round x 1 metre |
£2.00 per metre plus post |
|
Half round |
1.5 mm half round x 1 metre |
£3.00 per metre plus post |
|
Half round |
2.0 mm half round x 1 metre |
£3.00 per metre plus post |
|
Half round |
2.5 mm half round x 1 metre |
£3.00 per metre plus post |
The size is the radius.
Use for wing leading edges, to cap traditional materials or fill a "D" box shell.
Rod
| Rod |
0.25 mm dia x 1 metre |
£2.00 per metre plus post |
| Rod |
0.5 mm dia x 1 metre |
£2.50 per metre plus post |
| Rod |
0.75 mm dia x 1 metre |
£2.50 per metre plus post |
| Rod |
1.0 mm dia x 1 metre |
£3.00 per metre plus post |
| Rod |
1.5 mm dia x 1 metre |
£2.00 per metre plus post |
| Rod |
2.0 mm dia x 1 metre |
£3.00 per metre plus post |
| Rod |
2.5 mm dia x 1 metre |
£3.50 per metre plus post |
| Rod |
3.0 mm dia x 1 metre |
£5.00 per metre plus post |
| Rod |
0.125" dia x 1 metre |
£5.00 per metre plus post |
| Rod |
4.0 mm dia x 1 metre |
£4.00 per metre plus post |
| Rod |
5.0 mm dia x 1 metre |
£7.00 per metre plus post |
Use for wing leading edges (0.25 mm - 1.5 mm) and wing joiners (F1B - 3.0 mm, 0.125" & 4.0mm. F1A & F1C 0.25")
Micro Round Tubes
|
Micro tubes |
0.7 mm OD 0.27 mm ID x 1metre 0.4 grams |
£4.00 per metre plus post |
|
Micro tubes |
1.0 mm OD 0.50 mm ID x 1metre 0.8 grams |
£4.00 per metre plus post |
|
Micro tubes |
1.5 mm OD 0.70 mm ID x 1metre 2.0 grams |
£4.00 per metre plus post |
|
Micro tubes |
2.0 mm OD 1.00 mm ID x 1metre 3.5grams |
£4.00 per metre plus post |
|
Micro tubes |
2.5 mm OD 1.50 mm ID x 1metre 4.6 grams |
£4.00 per metre plus post |
|
Micro tubes |
3.0 mm OD 2.00 mm ID x 1metre 5.6 grams |
£4.00 per metre plus post |
|
Micro tubes |
4.0 mm OD 3.00 mm ID x 1metre 7.8 grams |
£4.00 per metre plus post |
|
Micro tubes |
4.0 mm OD 2.50 mm ID x 1metre 11.2 grams |
£4.00 per metre plus post |
|
Micro tubes |
5.0 mm OD 4.00 mm ID x 1metre |
£4.00 per metre plus post |
|
Micro tubes |
5.0 mm OD 3.00 mm ID x 1metre |
£4.00 per metre plus post |
|
Micro tubes |
6.0 mm OD 5.00 mm ID x 1metre |
£8.00 per metre plus post |
|
Micro tubes |
6.0 mm OD 4.00 mm ID x 1metre |
£8.00 per metre plus post |
|
Micro tubes |
7.0 mm OD 5.00 mm ID x 1metre |
£8.00 per metre plus post |
|
Micro tubes |
8.0 mm OD 7.00 mm ID x 1metre |
£10.00 per metre plus post |
|
Micro tubes |
8.0 mm OD 6.00 mm ID x 1metre |
£10.00 per metre plus post |
|
Micro tubes |
10.0 mm OD 8.00 mm ID x 1metre |
£10.00 per metre plus post |
|
Micro tubes |
12.0 mm OD 10.00 mm ID x 1metre |
£10.00 per metre plus post |
Micro Square Tubes
|
Micro tubes |
4.0mm OD 2.50 mm ID x 1metre |
£4.00 per metre plus post |
|
Micro tubes |
6.0 mm OD 4.00 mm ID x 1metre |
£5.00 per metre plus post |
|
Micro tubes |
8.0 mm OD 6.00 mm ID x 1metre |
£6.00 per metre plus post |
Note that where ID and OD sizes are the same the tubes will telescope.
Sheet
| Sheet |
20.00 mm x 0.50 mm thick x 1metre |
£6.00 per metre plus post |
|
Sheet |
40.00 mm x 0.50 mm thick x 1metre |
£10.00 per metre plus post |
Click here to go direct to the Maarten Vandijk web page for manufacturing details.
PULTRUDED CARBON FIBRE TUBE
|
0.125" (3.18mm) OD x 0.070" (1.78mm) ID x 36" (915mm) |
£3.00 each plus post |
|
0.196" (4.98mm) OD x 0.120" (3.00mm) ID x 36" (915mm) |
£3.00 each plus post |
Can be used as spars, push rods and rubber motor pegs.
UNIDIRECTIONAL CARBON FIBRE MATERIAL
Finished carbon sheet for spars and other structural components.
|
25" (100mm) long 4" (100 mm) wide 0.003" (0.09 mm) thick |
£20.00 per sheet plus post |
|
36" (910 mm) long 4" (100 mm) wide 0.005" (0.13 mm) thick |
£12.00 per sheet plus post |
|
36" (910 mm) long 6" (150 mm) wide 0.007" (0.18 mm) thick |
£18.00 per sheet plus post |
|
36" (910 mm) long 3" (150 mm) wide 0.007" (0.18 mm) thick |
£10.00 per sheet plus post |
|
48" (1220 mm) long 6" (150 mm) wide 0.007" (0.18 mm) thick |
£21.00 per sheet plus post |
|
36" (910 mm) long 3" (75 mm) wide 0.014" (0.36 mm) thick |
£12.00 per sheet plus post |
|
48" (1220 mm) long 3" (75 mm) wide 0.014" (0.36 mm) thick |
£15.00 per sheet plus post |
|
36" (910 mm) long 3" (75 mm) wide 0.021" (0.54 mm) thick |
£20.00 per sheet plus post |
|
48" (1220 mm) long 3" (75 mm) wide 0.021" (0.54 mm) thick |
£24.00 per sheet plus post |
|
36" (910 mm) long 3" (75 mm) wide 0.030" (0.76 mm) thick |
£25.00 per sheet plus post |
|
48" (1200 mm) long 3" (75 mm) wide 0.030" (0.76 mm) thick |
£30.00 per sheet plus post |
|
36" (910 mm) long 3" (75 mm) wide 0.042"(1.06 mm) thick |
£30.00 per sheet plus post |
|
48" (1200 mm) long 3" (75 mm) wide 0.042" (1.06 mm) thick |
£45.00 per sheet plus post |
|
28" (710 mm) long 3" (75 mm) wide 0.030" - 0.014" thick (0.76 mm - 0.36 mm) |
£15.00 per sheet plus post |
Some suggested uses: Sheets 1, 2 & 3 capstrips Sheets 4 - 11 spars Sheets 5, 6, 7 trailing edge
The sheet can be cut with a diamond saw and used without recourse to any further finishing. Alternatively cut with heavy duty knife. Fix with with either epoxy or cyano.
UNIDIRECTIONAL CARBON FIBRE MATERIAL CUT TO SIZE
There is a move towards purchasing pre-cut carbon spars rather than using sheet stock to cut ones requirements. The range of spars available has been revised and presented in a more logical format, the sizes provided should satisfy most needs. The spars are cut on a diamond saw so can be used straight away without recourse to any further finishing. Cap strips are excluded as these are easily and best cut with a knife from sheet by the user.
Tapered Spars
|
1. |
16" (405 mm) long 0.08" (2 mm) taper to 0.04" (1 mm) 0.007" (0.18 mm) thick |
£0.50 each plus post |
|
2. |
24" (610 mm) long 0.20" (5 mm) taper to 0.08" (2 mm) 0.014" (0.36 mm) thick, |
£1.25 each plus post |
|
3. |
24" (610 mm) long 0.20" (5 mm) taper to 0.08" (2 mm) 0.021" (0.54 mm) thick, |
£1.50 each plus post |
|
4. |
36" (910 mm) long 0.20" (5 mm) taper to 0.08" (2 mm) 0.014" (0.36 mm) thick, |
£1.75 each plus post |
|
5. |
36" (910 mm) long 0.20" (5 mm) taper to 0.08" (2 mm) 0.021" (0.54 mm) thick, |
£2.00 each plus post |
|
6. |
36" (910 mm) long 0.54" (10 mm) taper to 0.18" (4 mm) 0.042" (0.54 mm) thick, |
£5.00 each plus post |
|
7. |
36" (910 mm) long 0.48" (12 mm) taper to 0.18" (4 mm) 0.030" (0.76 mm) thick, |
£4.75 each plus post |
|
8. |
36" (910 mm) long 0.48" (12 mm) taper to 0.18" (4 mm) 0.042" (1.06 mm) thick, |
£5.50 each plus post |
|
19. |
12" (305 mm) long 0.25" (6 mm) taper to 0.08" (2 mm) 0.007" (0.18 mm) thick, |
£1.00 each plus post |
|
20. |
24" (610 mm) long 0.12" (3 mm) taper to 0.06" (1.5 mm) 0.014" (0.36 mm) thick, |
£1.25 each plus post |
|
21. |
24" (610 mm) long 0.12" (3 mm) taper to 0.06" (1.5 mm) 0.021" (0.54 mm) thick, |
£1.75 each plus post |
|
25. |
18" (457 mm) long 0.75" (19 mm) taper to 0.20" (5 mm) 1.007 (0.18 mm) thick |
£1.25 each plus post |
|
26. |
36" (910 mm) long 0.48" (10 mm) taper to 0.18" (4 mm) 0.042" (1.06 mm) thick, |
£5.50 each plus post |
| 27. | 36" (910 mm) long 0.40" (10 mm) taper to 0.18" (4 mm) 0.030" (.0.76 mm) thick, | £5.50 each plus post |
Trailing Edge
|
9. |
24" (610 mm) long 0.10" (2.5 mm) 0.021" (0.54 mm) thick, |
£1.50 each plus post |
|
10. |
24" (610 mm) long 0.14" (3.5 mm) 0.030" (0.76 mm) thick, |
£1.75 each plus post |
|
11. |
36" (910 mm) long 0.10" (2.5 mm) 0.030" (0.76 mm) thick, |
£1.75 each plus post |
|
12. |
36" (910 mm) long 0.14" (3.5 mm) 0.030" (0.76 mm) thick, |
£2.50 each plus post |
|
17. |
24" (610 mm) long 0.10" (2.5 mm) 0.030" (0.76 mm) thick, |
£1.75 each plus post |
Spars
|
13. |
24" (610 mm) long 0.06" (1.5 mm) 0.014" (0.36 mm) thick, |
£1.75 each plus post |
|
14. |
24" (610 mm) long 0.10" (2.5 mm) 0.014" (0.36 mm) thick, |
£1.25 each plus post |
|
15. |
28" (710 mm) long 0.12" (3.0 mm) 0.030" taper to 0.014" thick (0.76 mm to 0.36 mm), |
£1.50 each plus post |
|
16. |
28" (710 mm) long 0.20" (5.0 mm) 0.030" taper to 0.014" thick (0.76 mm to 0.36 mm), |
£2.50 each plus post |
|
18. |
24" (610 mm) long 0.06" (1.5 mm) 0.021" (0.54 mm) thick, |
£1.25 each plus post |
Strips
|
22. |
Strips for strengthening/reinforcement 270mm x 7 mm x 1.0 mm thick |
£1.00 each plus post |
Off-cuts from cutting process, please check availability before ordering
|
|
Small |
50p each plus post |
|
|
Large |
£1.00 each plus post |
Mix and match your own preferences - just let me know what combinations and sets you want. For complete flying surface package suggestions see Custom Kits
Some suggested uses:
Spar 1 - F1B, F1H, tip, F1G
Spar 2, 3, 20, 21 - F1B, F1H, F1J. centre panels & F1A tips
Spar 4, 5, 6 - F1B and F1H wing.
Spar 7, 8, - F1A and F1C centre panels.
Trailing edge 9, 11, 17 - F1B, F1H, F1J, F1C tail
Trailing edge 10, 12 - F1A, F1C
Spar 13, 14 - F1A, F1B, F1C, F1H, F1J tails, F1G wings
Spar 15, 16 - F1B, F1H, F1J
PULTRUDED MATERIAL AND SHEET IS ONLY AVAILABLE IN FULL LENGTHS
TUBULAR CARBON SPARS
The spars are produced from uni-directional cloth.
|
Tail spars |
3.2mm dia x 400mm long |
0.8grams |
£8.00 each plus post |
|
Tail spars |
3.2mm dia x 800mm long |
1.6grams |
£14.00 each plus post |
|
|
|||
|
Tail spars |
4.0mm dia x 800mm long |
|
£14.00 each plus post |
|
|
|||
| Tail Spars | 4.5mm dia x 800mm long |
£14.00 each plus post |
|
| Wing spars | 5.0mm dia x 800mm long |
£14.00 each plus post |
|
|
Wing spars |
6.0mm dia x 700mm long |
6.0 grams |
£16.00 each plus post |
|
Wing spars |
8.0mm dia x 700mm long |
10.0 grams |
£16.00 each plus post |
|
Wing spars |
10.0mm dia x 700mm long |
15.0 grams |
£16.00 each plus post |
|
Wing spars |
12.0mm dia 800mm long |
25.0 grams |
£18.00 each plus post |
Note that the tail spars will telescope together as will the wing spars. Weights are approximate and a guide.
All prices plus postage and packing see Postage & Packaging